Brother DCP-110C Service Manual Download Page 286

Page: 286 / 466

8-28

Confidential

(6) MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C
Press

the

and

keys on the machine.

DCP315CN/310CN/120C/117C/115C/110C

Enter 5 and 8 by using the and

Set

keys on the machine.*

(*To enter a numerical code on models having no numerical keypad, press the key several times to

display the numerical code to be entered and then press the

Set

key. Repeat this operation for each

numerical code.)

The "1.PF 2.EXIT" appears on the LCD.

(7) MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C

To select the paper feed roller adjustment, press the

key.

DCP315CN/310CN/120C/117C/115C/110C

To select the paper feed roller adjustment, enter 1 by using the and

Set

keys.*

The "PF ADJ NO. +0" appears on the LCD.

(8) Check the PF adjust check patterns ("A" on

page 8-30

) and select the one that is the least

uneven print. Make a note of that pattern number.

If the unevenness is far to the left of check pattern -8, regard it as -8; if it is far to the right of

check p8, regard it as +8. In this case, you need to check whether the paper feed roller

and head/carriage unit are set into place.

(9) Enter the number of the least uneven check pattern found in step (7).
MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C

For example, if the number of the least uneven check pattern is +4, press the and

keys; if -

4, press the and

keys. (To enter +, use the key; to enter -, use the key.)

DCP315CN/310CN/120C/117C/115C/110C

For example, if the number of the least uneven check pattern is +4, enter + and 4; if -4, enter -

and 4 by using the and

Set

keys.*

(*To enter a plus/minus symbol or numerical code on models having no numerical keypad, press the

key several times to display the

or numerical code to be entered, respectively, and then press the

Set

key. Repeat this operation for each symbol or numerical code.)

The machine automatically returns to the initial stage of the maintenance mode.

(10) MFC620CN/425CN/420CN/410CN/215C/210C and FAX2440C

Press

the

and

keys on the machine.

DCP315CN/310CN/120C/117C/115C/110C

Enter 5 and 8 by using the and

Set

keys on the machine.*

The "1.PF 2.EXIT" appears on the LCD.

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands

Brother DCP-110C, Service Manual

Search results

Summary of Contents for DCP-110C

Reviews:

Brands by name

Popular brands