Installation and Operation Manual
X-DPT-DeviceNet-SLA5800-SLAMf-Series-RevB-PC-eng
Part Number: 541B200AAG
March, 2015
59
Section 5 - Detailed Configuration
Brooks DeviceNet PCs
Table 5-55 S-Device Supervisor Instance 1 Services
Service
Code Service
Name
Service Description
Details
0x0E
Get Attribute Single
Returns the contents of the specified attribute
Appendix E: Get Attribute Single
0x10
Set Attribute Single
Sets the contents of the specified attribute
with the value passed with this service
Appendix E: Set Attribute Single
0x05
Reset
Resets the device to the Self-Testing state
Acceptance of these services is
dependent upon the current device
operational state.
See State Event Matrix or Diagram in
Appendix F - State Machine.
For details on Perform Diagnostic
Service go to Perform Diagnostics in
Service Details section
0x06
Start
Moves the device to the Executing State
0x07
Stop
Moves the device to the Idle State
0x4B
Abort
Moves the device to the Abort State
0x4C
Recover
Moves the device out of the Abort State
0x4E
Perform Diagnostics
Causes the device to perform a set of
diagnostic routines.
5.6.2.1. Service Details
5.6.2.2. Perform Diagnostics
Table 5-56 Diagnostics Service Arguments
Parameter
Name
Data
Type Required
Parameter
Value
Semantics
Test ID
USINT
N
See Test ID Table Below
The identifier of the diagnostic test to be performed. See
Table Below
Table 5-57 Test ID
Test ID
Description
0 (default)
Standard
Table 5-58 Diagnostic Service Response
Parameter Name
Data Type
Required Value
Parameter
Description
NO RESPONSE DATA
