Installation and Operation Manual
X-DPT-DeviceNet-SLA5800-SLAMf-Series-RevB-PC-eng
Part Number: 541B200AAG
March, 2015
24
Section 4 - Configuration
Brooks DeviceNet PCs
4.1.11. Polled Connection Group
Table 4-10 Polled Connection Values
Parameter Values
Description
EPATH
Poll Prod Assy
1
See “Summary Table of Input Assemblies”
-Appendix A -Assembly Object Detail
This parameter selects the Assembly
the Polled I/O Connection will use to
produce data
[0x5-2-100]
Poll Cons Assy
2
See “Summary Table of Output
Assemblies” -Appendix A -Assembly Object
Detail
This parameter selects the Assembly
that the Polled I/O Connection will use
to receive data
[0x5-2-101]
4.1.12. Device Info Group
All values associated with this group are Read Only
Table 4-11 Supported Device Info Parameters
Parameter Values
Description
EPATH
Device Type
“PC”
The SEMI Standard specified name which identifies the Device
Model used by this device
[0x30-1-3]
SEMI Standard Rev.
Level
“E54-0997”
The revision level of the SEMI S/A Network Standard to which
this device complies
[0x30-1-4]
Mfr. Name
“Brooks
Instrument”
The name of the manufacturer of the device
[0x30-1-5]
Mfr. Model Number
The model number of the device assigned by Brooks Instrument
[0x30-1-6]
Software Rev
The firmware revision contained in the device
[0x30-1-7]
Hardware Rev.
The hardware revision of the electronics contained in the device
[0x30-1-8]
Mfr. Serial Number
The serial number assigned to the device by Brooks Instrument
[0x30-1-9]
Device Config
Any additional configuration information related to the device
[0x30-1-10]
1
A power cycle or reset is required for the value of this attribute to take affect.
2
A power cycle or reset is required for the value of this attribute to take affect.
