manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual

The Bosch Security Escort SE2000 Series is a cutting-edge security system designed to ensure maximum safety. To fully understand its advanced features, you can easily access the comprehensive Technical Reference Manual. This invaluable manual can be downloaded for free from manualshive.com, empowering you to make the most of your security system.

Share
Download
background image

Security Escort

System components/specifications | en

11

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

2

System components/specifications

2.1

Central Console

Description

The Central Console consists of one or two computers (and up to 8 additional workstations)
running the Security Escort software within the Microsoft Windows environment. One
computer serves as the master controller for the entire Security Escort system and the second
slave computer serves as a back-up. The slave computer can be used for administrative
functions such as adding subscribers or performing routine system tests without interfering
with the operation of the main computer. The workstations can perform all normal Security
Escort functions with the exception of communicating with the transponders.

Software overview

The Central Console contains all of the operating software and all of the databases required
by the Security Escort system. The installation and maintenance portion of the Security Escort
software is designed to facilitate set-up and modification of the system and to provide rapid
diagnosis of system problems, usually with only one person being required. The system
software also continually monitors the status of each transponder to ensure it is functioning
correctly.

Versions

There are several versions of the software available. The number of users the system will
support defines each version. The following table lists the available models and the number of
supported users:

Model

User Base

SE2005

500

SE2010

1,000

SE2050

5,000

Notice!

For systems supporting more than 5,000 users contact Bosch Security Systems Sales.

Minimum system requirements

As a minimum, each computer in the Central Console should be equipped with the following
features and components:
–

Processor:

 1 GHz or faster.

–

Operating system:

 Microsoft Windows XP

®

, Windows 7

®

 32/64-bit, Windows 8/8.1

®

 32/64-

bit, Windows 10

®

 32/64-bit

–

RAM:

 Minimum 2 GB, due to .NET requirement

–

Hard disk space:

 1 GB of hard disk space should be available to allow collection of

historical data

–

Backup:

 External backup drive for backup and history storage.

–

Video:

 VGA (640 x 480) at 256 colors minimum, 800 x 600 High color (16 bits)

recommended, 1024 x 768 High color supported. True color (24 bits) is also supported. If
displaying subscriber images, High color (16 bits) or True color (24 bits) should be used.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments

Related manuals for Security Escort SE2000 Series

D-Link DWC-2000 Cli Reference Manual preview
DWC-2000
Brand: D-Link Pages: 113
D-Link DWC-1000 Reference Manual preview
DWC-1000
Brand: D-Link Pages: 146
Eaton SC300 Operation Handbook preview
SC300
Brand: Eaton Pages: 166
NEC UNIVERGE SL2100 Networking Manual preview
UNIVERGE SL2100
Brand: NEC Pages: 196
NEC UNIVERGE SL2100 Hardware Manual preview
UNIVERGE SL2100
Brand: NEC Pages: 174
NEC ElectraElite IPK General Description Manual preview
ElectraElite IPK
Brand: NEC Pages: 151
Accel 300+ Installation Instructions Manual preview
300+
Brand: Accel Pages: 8
Access Flow2 User'S Manual & Installation Instructions preview
Flow2
Brand: Access Pages: 12
Eaton A201 Instruction Leaflet preview
A201
Brand: Eaton Pages: 6
Jabra TAG Quick Start Manual preview
TAG
Brand: Jabra Pages: 18
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Brand: Madas Pages: 6
Madas EVP/NC Manual preview
EVP/NC
Brand: Madas Pages: 11
Omnex R1300 Manual preview
R1300
Brand: Omnex Pages: 9
Omegon MiniTrack LX2 Instruction Manual preview
MiniTrack LX2
Brand: Omegon Pages: 6
WATERLOO Smart Panel Owner'S Manual preview
Smart Panel
Brand: WATERLOO Pages: 8
Rane ECS Hardware Manual preview
ECS
Brand: Rane Pages: 14
Samson TROVIS 3730-1 Installation Instructions Manual preview
TROVIS 3730-1
Brand: Samson Pages: 6
Eaton FC18 User Manual preview
FC18
Brand: Eaton Pages: 10

Brands by name

Popular brands

Load more brands