manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual

The Bosch Security Escort SE2000 Series is a cutting-edge security system designed to ensure maximum safety. To fully understand its advanced features, you can easily access the comprehensive Technical Reference Manual. This invaluable manual can be downloaded for free from manualshive.com, empowering you to make the most of your security system.

Share
Download
background image

Security Escort

System components/specifications | en

15

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

When the transmitter is tested, a special “low battery” message is included in the
transmission to Central Console if the transmitter’s battery is in need of replacing. Every
successful test is recorded in the 

Subscriber Database

 in the Central Console software and

optionally printed on the hardcopy printer. The 

Subscriber Database

 contains all of the

information relating to each subscriber, including the date and time of the most recent test
transmission. It is possible to search the 

Subscriber Database

 for individuals who have not

performed tests for a specified period of time.

2.4

SE3401 asset tracking transmitter

Features

–

Alerts Central Console of Transmitter’s ID and location immediately on alarm.

–

Available post-alarm tracking, alarm map recall, and more.

–

Internal antenna.

–

Two-year battery life.

–

Can be mounted virtually anywhere on virtually anything.

–

Low battery indication at Central Console.

–

Includes mounting plate.

Description

The SE3401 Point Tracking Transmitter contains a unique code which is associated with an
asset at the time the Transmitter is assigned. When an alarm is generated, this code is sent to
the Central Console, which graphically displays the asset’s location on a map along with a
picture of the asset and any other necessary information.

Installation

The SE3401 can be configured to monitor magnetic or dry external contacts. When mounted
with an external magnet, the SE3401 is mounted on the asset and the magnet is mounted on
an opposite surface (such as a wall). When mounted with external contacts, the SE3401 can
be mounted anywhere on the asset and connects to the contact by two wires connected to
the terminals inside the Transmitter and an end-of-line resistor.

Transmitting an Alarm

Depending on the installed options, when an alarm is generated within approximately two
seconds, the sounders in any nearby Receivers could be activated as well as the Strobes and
Sirens connected to nearby Alert Units. The alarm signal is transmitted to the Receivers which
in turn relay the alarm signal to the Transponder and along to the Central Console. The Central
Console graphically displays the Transmitter’s location along with the asset’s description and
a picture of the asset. Also, once an alarm is initiated, the Transmitter commences its Auto-
Tracking feature.

Auto Tracking Feature

Once an alarm has been initiated (such as when the Transmitter has been moved away from
the magnet) the Auto-Tracking feature will begin. The Transmitter will send a signal back to
the Central Console every few seconds updating its location for several minutes. To reset the
Transmitter after an alarm has been initiated, all device conditions (e.g., tamper, loop,
magnet) must be reset to normal.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments

Related manuals for Security Escort SE2000 Series

GE RSTi-EP User Manual preview
RSTi-EP
Brand: GE Pages: 425
Coris OMM-120-15 Quick Start Manual preview
OMM-120-15
Brand: Coris Pages: 4
Festool MS6-SV-...-D-10V24 Operating Instructions Manual preview
MS6-SV-...-D-10V24
Brand: Festool Pages: 32
SOMFY Situo 1 RTS Quick Installation Manual preview
Situo 1 RTS
Brand: SOMFY Pages: 56
MARTINS Industries MTWL User Manual preview
MTWL
Brand: MARTINS Industries Pages: 20
Penn V46 Series Repair Parts And Service Instructions preview
V46 Series
Brand: Penn Pages: 10
Dannmar D4-9 Installation And Operation Manual preview
D4-9
Brand: Dannmar Pages: 85
CTE ZED 20.3 HV Instructions For Use And Maintenance Manual preview
ZED 20.3 HV
Brand: CTE Pages: 130
Casambi CBU-PWM4-4 Manual preview
CBU-PWM4-4
Brand: Casambi Pages: 4
Taylor i16 Operating Manual preview
i16
Brand: Taylor Pages: 34
Skyjack 6826El Operating Manual preview
6826El
Brand: Skyjack Pages: 47
Parker ACR1505 Hardware Installation preview
ACR1505
Brand: Parker Pages: 64
Wachs Vitals Reference Manual preview
Vitals
Brand: Wachs Pages: 224
Metek TWRF1 SCR Series Instruction, Operation And Maintenance Manual preview
TWRF1 SCR Series
Brand: Metek Pages: 36
Tyco DSC WT5500 Installation Instructions Manual preview
DSC WT5500
Brand: Tyco Pages: 32
SUPMEA SUP-DC2000 User Manual preview
SUP-DC2000
Brand: SUPMEA Pages: 40
M-system R3-SV8C Instruction Manual preview
R3-SV8C
Brand: M-system Pages: 3
Proslat HEAVY DUTY HOIST Installation Manual preview
HEAVY DUTY HOIST
Brand: Proslat Pages: 6

Brands by name

Popular brands

Load more brands