manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 71 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 71

Security Escort

Central Console, computer setup and programming | en

71

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

Default Master computer

This computer is either the only computer in the system, or
on startup, this computer defaults to the Master computer in
a live Security Escort System.

Default Slave computer

On startup, this computer defaults to the slave computer in
a live Security Escort System.

Workstation computer

This computer is used in a live Security Escort System for all
operator functions. It cannot control the system like the
Master and Slave computers.

Remote computer

This computer is not in a live Security Escort System. It is
used only for remote access. For this setting to be enabled,
all transponder communication ports and the network port
must be set to “None”.

Emergency answer only

Allows the Master computer to answer a remote access only
after 10 rings. If the Master does not answer, the Slave
answers after 12 rings.

Master computer answers

Allows the Master computer to answer a remote access after
the programmed number of rings. If the Master does not
answer, the Slave will answer after the programmed number
of rings plus 2.

Slave computer answers

Allows the Slave computer to answer a remote access after
the programmed number of rings. If the Slave does not
answer, the Master answers after the programmed number
of rings plus 2. Generally, it is better to have the Master
computer answer remote access calls.

Direct connect port

The modem port is not connected to a modem. This setting
will allow a direct connection to another computer. This
additional computer will not display alarms, but otherwise
will behave like a Slave computer.

Answering machine override

If checked, an answering machine is connected to this
phone line. If the answering machine answers a remote
access call, hang up and redial. When another call is
received within 1 min. of the last ring of a previous call, the
Security Escort System will answer on the first ring,
overriding the answering machine.

Pulse dial

If checked, use pulse dial on all outgoing calls. Otherwise,
tone dialing (default) is used.

Answer on ring

Program the number of rings on which to answer. If there is
an answering machine on this phone line, set the number of
rings to at least 2 greater than the number of rings the
answering machine answers. Also check the 

Answering

Machine Override

 checkbox.

Dialing prefix

On outgoing calls, enter the dialing prefix, if any.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments