manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 73 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 73

Security Escort

Central Console, computer setup and programming | en

73

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

6.4

Transponder Database

The 

Transponder Database

 is established at system set-up and contains all necessary

configuration data for each transponder, receiver and alert unit. It describes the basic
structure of the installation, including all device names, locations, types, multiplex addresses,
etc. This information is used by the Central Console to generate “Alarm” and “Test” displays
on the Console and in determining which alert units are to be activated. Access to the

Transponder Database

 is from the 

File

 menu on the main menu bar. The following paragraphs

describe the elements of the 

Transponder Database

 dialog.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments