Bosch Security Escort SE2000 Series Page 189 Training Manual Download

Page: 189 / 248

Security Escort

System menus and dialogs | en

189

Robert Bosch (SEA) Pte Ltd

Training Manual

2017.08 | V2.18.1.0 | DOC

Fail to test letters

Notices to all of the subscribers that have not tested within the
last 28 days. Not currently implemented.

Weekly subscriber test
report

Report of subscriber testing for the last 7 days broken down by
hour.

Weekly security test report

Report of security personnel testing for the last 7 days broken
down by hour.

Weekly watchman test
report

Report of watchman personnel testing for the last 7 days broken
down by hour.

Weekly maintenance test
report

Report of maintenance testing for the last 7 days broken down
by hour.

Subscriber Check-in report

Report of all subscribers that failed to check-in during the last
scheduled check-in period.

Supervision Location report

Report of all supervision enabled subscribers and their last
known location.

[Print]

The

[Print]

button is only enabled if the printer is enabled from

the

Printer > Select report printer

dialog box. Clicking this

button prints all reports that are checked in the left-hand check
boxes.

[Export]

The

[Export]

button is enabled if only the

Not testing report

selected. Other reports must not be selected. Clicking this
button exports the

Not testing report

in a ".csv" file format.

[Save]

Clicking this button saves the current configuration of selected
reports and closes the dialog box. The reports that are selected
previously are now marked as selected when you open the dialog
box again subsequently.

[Cancel]

Clicking this button closes the dialog box without saving the
current configuration of selected reports.

Print report now

Reports that are selected are printed when the

Print

button is

clicked.

Midnight report

Reports are automatically generated every midnight for all
reports that are checked in the

Midnight report

checkboxes.

Sunday report

Reports are automatically generated every Sunday at midnight
for all reports that are checked in the

Sunday report

checkboxes.

8.2.4

Export Alarm Reports

This dialog allows the alarm reports to be exported to CSV file. To export an alarm report, you
may directly enter the alarm date range, or click the

[…]

(ellipsis) button in

From Date

Date

fields and select

From Time

To Time

from the respective drop-down values. An alarm

report can also be generated based on the subscriber details. Select the

Subscriber ID

Subscriber Name

Transmitter ID

Subscriber Type

from the drop down list to generate an

alarm report only for the selected values.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Search results

Summary of Contents for Security Escort SE2000 Series

Reviews:

Related manuals for Security Escort SE2000 Series

Brands by name

Popular brands

Bosch Security Escort SE2000 Series, Training Manual

Search results

Summary of Contents for Security Escort SE2000 Series

Reviews:

Related manuals for Security Escort SE2000 Series

Brands by name

Popular brands