manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 114 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 114

114

en | Troubleshooting transponders, points, receivers, and alert units

Security Escort

2017.08 | V2.18.1.0 | DOC

Training Manual

Robert Bosch (SEA) Pte Ltd

Show maintenance levels

Checking this checkbox causes the Central Console to display
the signal strength measured by each receiver as a number (from
1 to 15) inside the receiver icon when maintenance alarms are
displayed. Otherwise, the floor number is displayed.

Show test levels

Checking this checkbox causes signal strength levels to appear
on the receiver icons when displaying tests on the main map
screen. Otherwise the green test” icons are displayed.

Enable algorithm tweaks

Checking this checkbox causes the Map Scale, Alarm Spot Size,
and depth settings to be displayed in this dialog. It also controls
the display of the 

SA%

 and 

Algorithm

 settings in the 

Edit

Transponder

’

s Database Record

 dialog

Pager communications

Normally, this checkbox is not checked. If checked, the
communications to the dial-up wide area paging system through
the modem will be displayed on the history screen. This function
is only used to diagnose communications problems to the paging
system.

Monitor communications

Normally, this checkbox is not checked. If checked, the
communications to the modem will be displayed on the history
screen. This function is only used to diagnose communications
problems with the modem.

Monitor supervisions

Monitor supervision alarms.

Display maintenance alarm

Normally, when a maintenance alarm is received from a
maintenance transmitter, the red LED on all receivers hearing the
transmission will flash for 5 seconds. If this checkbox is checked,
the receiver with the loudest reception level will turn on both the
red and green LED for 5 seconds.

Sound maintenance alarm

If this checkbox is checked, the receiver with the loudest
reception level on a maintenance alarm will turn on its sounder
for 5 seconds. Normally this checkbox is not checked.

Disable idle processing

Normally this software registers with Windows to return to the
Security Escort System if there is any idle time. The Security
Escort System can use it to speed up its response to serial
communications and other background tasks. If checked, the
software will not register for the idle time. Normally, this
checkbox is not checked. Windows can show the amount of time
each application (task) is taking. When this checkbox is not
checked, it may appear that Security Escort System is “hogging”
the processor resources. This is not true, because the Security
Escort System is only taking the time that Windows gives it
through the idle process. To prove this, check this checkbox. The
amount of time that the Security Escort System needs will drop
dramatically, and it will continue to operate normally (same
communications responses will be slowed by several hundred
milliseconds).

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments