manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual

The Bosch Security Escort SE2000 Series is a cutting-edge security system designed to ensure maximum safety. To fully understand its advanced features, you can easily access the comprehensive Technical Reference Manual. This invaluable manual can be downloaded for free from manualshive.com, empowering you to make the most of your security system.

Share
Download
background image

146

en | Troubleshooting transponders, points, receivers, and alert units

Security Escort

2017.08 | V2.18.1.0 | DOC

Training Manual

Robert Bosch (SEA) Pte Ltd

Figure 7.23: Find Subscriber's Database Record Dialog

7.12.1

".dat" file format

The “.dat” file must be in tab delimited text format. The data fields must be in the following
order, delimited by the horizontal tab character (decimal 8) and the record must be
terminated with a carriage return (decimal 13). If a data field has no data, just store the
terminating tab character for that field. The total number of characters in all the fields of a
record must be 255 characters or less, including the tab and carriage return characters.

Data fields in required
order

Excel Column Restrictions

Subscriber Name

A

This field may be up to 30 characters. This field
may contain any printable ASCII character
except the ‘?’.

Subscriber ID

B

This field may be up to 12 characters. This field
may contain only ALPHA, numeric and the dash
ASCII characters.

Here Phone Number

C

This field may be up to 16 characters. This field
may contain only numeric, ‘#’, ‘*’, ‘(‘, ‘)’, comma
and the dash ASCII characters.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments

Related manuals for Security Escort SE2000 Series

VAT 168 Series Installation, Operating, & Maintenance Instructions preview
168 Series
Brand: VAT Pages: 29
Balboa Instruments Dolphin Manual preview
Dolphin
Brand: Balboa Instruments Pages: 19
QUAD 33 Instruction Book preview
33
Brand: QUAD Pages: 16
Ohsung Electronics B905-FTN-TA User Manual preview
B905-FTN-TA
Brand: Ohsung Electronics Pages: 18
Dantherm DRC1 Instructions Manual preview
DRC1
Brand: Dantherm Pages: 96
IAI ROBO Cylinder RCP2 Series Quick Start Manual preview
ROBO Cylinder RCP2 Series
Brand: IAI Pages: 5
Saab R5 SUPREME AIS Short Instruction preview
R5 SUPREME AIS
Brand: Saab Pages: 4
Full Gauge Controls MT-543Ri LOG Manual preview
MT-543Ri LOG
Brand: Full Gauge Controls Pages: 3
Elby Designs ASM301-ADSR Diagrams preview
ASM301-ADSR
Brand: Elby Designs Pages: 4
East Coast Datacom DMM-X21 Operation Manual preview
DMM-X21
Brand: East Coast Datacom Pages: 14
Linak CBH Advanced User Manual preview
CBH Advanced
Brand: Linak Pages: 33
Topway LMT070DICFWD-NJN User Manual preview
LMT070DICFWD-NJN
Brand: Topway Pages: 34
Allen-Bradley 1756-L72EROM Installation Instructions Manual preview
1756-L72EROM
Brand: Allen-Bradley Pages: 16
D+H RCM 230-11-U Original Instructions preview
RCM 230-11-U
Brand: D+H Pages: 2
Sielco Elettronica D1-15A User Manual preview
D1-15A
Brand: Sielco Elettronica Pages: 15
M-system R7F4HEIP-DAC16C Instruction Manual preview
R7F4HEIP-DAC16C
Brand: M-system Pages: 7
Federal Signal Corporation Serial Interface Module Installation And Programming Instructions preview
Serial Interface Module
Brand: Federal Signal Corporation Pages: 12
Digi XBee DigiMesh 2.4 User Manual preview
XBee DigiMesh 2.4
Brand: Digi Pages: 157

Brands by name

Popular brands

Load more brands