manualshive.com logo in svg

Bosch Security Escort SE2000 Series, Training Manual, Page: 58 / 248

Share
Download
Bosch Security Escort SE2000 Series Training Manual Download Page 58

58

en | Installation options

Security Escort

2017.08 | V2.18.1.0 | DOC

Training Manual

Robert Bosch (SEA) Pte Ltd

5.4

Installing the Security Escort software

5.4.1

Software installation procedure

Typically the Security Escort program is delivered on a CD-ROM.

Notice!

Exit all other programs before inserting the CD-ROM.

An autorun feature should automatically start the installation program. If not, run SETUP.EXE
using one of the following methods:
1.

Double click the 

Computer

 icon on the desktop. Select the Compact Disc (X:), double-

click the INSTALLER directory. Double-click the SETUP.EXE icon. X is the letter of the CD-
ROM drive.

2.

Go to 

Start 

>

 Programs 

>

 Windows Explorer

. In Windows Explorer, select the Compact

Disc (X:) and double-click the INSTALLER directory. Double-click the SETUP.EXE icon.

3.

Click 

Start 

>

 Run. 

Type “X:\INSTALLER\SETUP.EXE” in the 

Open

 textbox and click the

[OK]

 button. X is the drive letter for the CD-ROM drive.

Once SETUP.EXE is running, the following 

Welcome

 dialog appears.

Figure 5.1: Security Escort Setup Welcome Dialog

You can click the 

[Cancel]

 button at any stage of installation to abort installation. The 

Exit

Setup

 dialog will appear. Click the 

[Yes]

 button to abort installation.

Summary of Contents for Security Escort SE2000 Series

























































































































































































































































Reviews:

No comments