Bosch DDU 7, Manual

Page: 5 / 156

Display Unit DDU 7 Table of contents | en 5
Bosch Motorsport Manual 04.02.2019 | V 02 |
12 Error Memory 104
12.1 Error memory representation in RaceCon 104
12.1.1 Accessing the memory 104
12.1.2 Clearing the error memory 105
12.2 Information on errors available from the error memory 106
12.2.1 Error Memory Properties 106
12.2.2 Error Properties 108
12.3 Analog Input Diagnosis 110
12.3.1 Monitoring limits / Shortcut Detection / Cable Breakage 110
12.3.2 Open Line Detection 111
13 Recording and Telemetry 112
13.1 Features 112
13.2 Configuration of recordings 112
13.2.1 Adding a recording 114
13.2.2 Adding a recording group 114
13.2.3 Global settings 114
13.2.4 Recording statistics 115
13.2.5 Recording diagnosis 116
13.2.6 Displaying online recording diagnosis ('statectrl_ok') 117
13.3 Configuration of online telemetry 117
13.3.1 Long range telemetry system FM 40 117
13.3.2 Hardware setup 118
13.3.3 Software setup 118
13.3.4 Telemetry channels with special functionality 120
13.4 Setup for USB recording 121
13.4.1 Recording data on USB device 122
13.4.2 USB device handling hints 126
13.4.3 Troubleshooting 126
14 Lap Trigger 127
14.1 Lap trigger (timing beacon) 127
14.1.1 Electrical trigger signal 127
14.1.2 Prevention of false triggers 128
14.1.3 Forced triggers 128
14.1.4 Setting up a lap trigger 128
14.1.5 Lap trigger channel diagnosis/counter reset 130
14.1.6 Lap trigger presettings 130
14.2 Counting outing/laps/fragments 131
14.3 Lap timing 132
14.3.1 Time Based Retrigger Protection 132
14.3.2 Distance Based Retrigger Protection 132
14.3.3 Distance Based Forced Trigger 133
14.4 Segment timing 134
14.4.1 Sub Trigger Mode 134
14.4.2 Distance Mode 135
14.5 Countdown timer 136
15
Firmware 137
15.1 Firmware and configuration 137
15.2 Firmware update 137
15.2.1 Performing the firmware update 137