Bosch DDU 7, Manual

Page: 79 / 156

Display Unit DDU 7 Analog and Frequency Inputs | en 79
Bosch Motorsport Manual 04.02.2019 | V 02 |
7. Click ‘Ok’ when done.
The channel is inserted into the DDU 7 Project Tree.
Calculation of
physical value with
characteristic curve
Input pin
Pull-up
resistor is
activated
Channel
is linked
to
ANA03
Available measurements for channel:
Measurement label Function
raw_name mV value of sensor
raw_name_fi filtered mV value of sensor
name physical value of sensor
name_fi filtered physical value
10.3.2 Configuring a generic linear sensor
Example: Acceleration sensor 5 g
From sensor data sheet – operating characteristics:
Sensitivity 400 mV/g, Offset 2500 mV
The sensor has a linear output signal with sensitivity and offset
1.
Click on ‘Measurement Sources’ in the Toolbox.
2. Expand the list of ‘I/O Channels’ by clicking on ‘+’ in the DDU 7 Project Tree.