Bosch DDU 7, Manual

Page: 78 / 156

78 en | Analog and Frequency Inputs Display Unit DDU 7
04.02.2019 | V 02 | Manual Bosch Motorsport
– DDU 7 uses A/D converter oversampling and digital filtering to recording rate
– Digital filters eliminate ‘out-of-band’ noise
– Cut-off frequency automatically adjusted to recording rate
– Linear phase - no signal distortion
– Latency compensation - no filter delay in recorded data
10.2.1 Measurement channels
10.3 Configuring inputs
10.3.1 Configuring a predefined Bosch sensor with the 'Bosch Sensor Wizard'
1. Click on ‘Measurement Sources’ in the Toolbox.
2. Expand the list of ‘I/O Channels’ by clicking on ‘+’ in the DDU 7 Project Tree.
3. Drag the ‘Bosch Sensor Wizard’ from the Toolbox and drop it on the desired analog input
channel in the DDU 7 Project Tree. The ‘Bosch Sensor Wizard’ opens.
3
rd
: Select the
exact type
Opens sensor’s
datasheet
2
nd
: Narrow your
choice by
choosing a type
These calibration
values will be
used
1
st
: Choose
the sensor’s
category
4. Click ‘Finish’ when done.
5. The ‘Create channel’ window opens.
6. Enter channel name and description.