44
en | Display Configuration
Display Unit DDU 7
04.02.2019 | V 02 |
Manual
Bosch Motorsport
8.4
Page select / Display brightness / LED brightness
Any “event” can be used to change the display and LED brightness or the display page. Those
events can be any input channel or an internal calculated channel. In the following chapters,
you will find some examples on how to set up such a configuration.
8.4.1
General information
To use a channel as a page switch, select “Channel based” as page switch and select the
channel you configure for a switch in the ‘display settings’ dialog (as described in the
following chapters).
To use a channel as a brightness switch, check the box “Use a channel to switch brightness”
and select the channel you configure for a switch.
Page switch
The pages can be switched from page one too twelve. If not all twelve pages are defined, the
device switches up to the highest defined page number, and ignores higher numbers, which
are not defined.
If the channel value does not only consist of integers, the pages will be switched as follows:
Page 1 is shown with the value < 1.5
Summary of Contents for DDU 7
Page 1: ...Display Unit DDU 7 Manual V 02 2 4 2019 ...
Page 2: ......
Page 139: ...Display Unit DDU 7 Firmware en 139 Bosch Motorsport Manual 04 02 2019 V 02 ...
Page 155: ......
