Bosch AutoDome 600 Series, Installation Manual

Page: 4 / 92

4 en | Table of Contents AutoDome 600 Series Analog PTZ Camera
F.01U.215.782 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.
3.9 Attach Pendant to Pipe and Tighten 56
3.10 Make Connections in the Power Supply Box 57
3.10.1 Connections for Fiber Optic Models 57
4 Installing the In-Ceiling Mount 58
4.1 Unpacking 58
4.1.1 Parts List 58
4.1.2 Description 58
4.1.3 Tools Required 58
4.2 Pre-installation Check List 59
4.3 Dimensions 59
4.4 Prepare Drywall Ceiling for Installation 60
4.5 Prepare Suspension Ceiling for Installation 60
4.6 Wire the Interface Box 61
4.6.1 Coaxial Cable Connections 62
4.6.2 Make the Connections 62
4.6.3 Interface Box Connections 65
4.7 Prepare Bubble 66
4.8 Attach Housing to the Interface Box 67
4.9 Secure Housing to Ceiling 69
5 Cable and Wire Standards 70
5.1 Power 70
5.2 Wire Distance Guide for Pendant 70
5.3 Video and Control Cables 70
5.3.1 Using Coaxial Cable to Transmit Video and Control 70
5.3.2 Using UTP to Transmit Video and Control 71
5.3.3 Using Multi-mode Fiber Optic to Transmit Video and Control 72
5.4 Control-only Cables 72
5.4.1 Controlling the AutoDome via Biphase 72
5.4.2 Controlling the AutoDome via the RS232 Protocol 74
5.4.3 Controlling the AutoDome via the RS485 Protocol 75
5.5 Fiber Optic Module with an RS232/RS422 Controller 76
5.5.1 Connecting to an LTC 4629 Head End Data/Video Transceiver 77
5.5.2 Configuring the VG5 AutoDome 77
6 Alarms and Relay Connections 79
6.1 Alarm Inputs 79
6.2 Configuring Supervised Alarms (inputs 1 and 2) 79
6.2.1 Configuring a Normally Open Supervised Alarm 79
6.2.2 Configuring a Normally Closed Supervised Alarm 80
6.3 Configuring Non-supervised Alarms (inputs 1 through 7) 81
6.3.1 Configuring a Normally Open Non-supervised Alarm 81
6.3.2 Configuring a Normally Closed Non-supervised Alarm 81
6.4 Alarm Outputs 82
6.4.1 Configuring a Dry Contact Relay 82
6.4.2 Configuring an Open Collector Output 82