Bosch AutoDome 600 Series, Installation Manual

Page: 3 / 92

AutoDome 600 Series Analog PTZ Camera Table of Contents | en 3
Bosch Security Systems, Inc. Installation Manual F.01U.215.782 | 1.0 | 2011.04
Table of Contents
1 Safety 6
1.1 Important Safety Instructions 6
1.2 Safety Precautions 8
1.3 Important Notices 8
1.4 Customer Support and Service 12
2 Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts 13
2.1 Unpacking 13
2.1.1 Parts List 13
2.1.2 Description 14
2.1.3 Tools Required 14
2.2 Pre-installation Checklist 14
2.3 Mount Power Supply Box 15
2.4 Route Wires and Attach Connectors 16
2.4.1 Coaxial Cable Connections 17
2.4.2 Make the Connections 17
2.4.3 Power Supply Box Connections 20
2.5 Route Power through Intermediate Power Supply Box 21
2.6 Attach Pendant Arm to Power Supply Box 25
2.7 Make Connections in Power Supply Box 26
2.8 Installing the VG4-A-ARMPLATE 29
2.8.1 Attach the Pendant Arm to the Mounting Plate 30
2.8.2 Route and Connect Wires to a Power Supply Box 31
2.9 Prepare Pendant for Installation 33
2.10 Attach Pendant to Arm and Tighten 35
3 Installing Roof Parapet and Pipe Mounts 37
3.1 Unpacking 37
3.1.1 Parts List 37
3.1.2 Description 37
3.1.3 Tools Required 38
3.2 Pre-installation Check List 38
3.3 Mount Power Supply Box 39
3.3.1 Attach Cover Door 40
3.4 Route Wires and Attach Connectors 41
3.4.1 Coaxial Cable Connections 41
3.4.2 Methods for Routing Wires 42
3.4.3 Wiring the Power Supply Box 44
3.4.4 Wiring the Fiber Optic Model 44
3.4.5 Power Supply Box Connections 46
3.5 Installing the VG4-A-9230 Roof Parapet Mount 47
3.6 Installing the VG4-A-9543 Pipe Mount 50
3.7 Wire the Pipe Interface Board 51
3.7.1 Wiring for Multiple AutoDomes 52
3.7.2 Connecting Wires to the Pipe Interface Board 52
3.8 Prepare Pendant for Installation 54