AutoDome 600 Series Analog PTZ Camera
Installing Roof Parapet and Pipe Mounts | en
41
Bosch Security Systems, Inc.
Installation Manual
F.01U.215.782 | 1.0 | 2011.04
3.4
Route Wires and Attach Connectors
Power wires must be routed to the left (front) side of the Power Supply Box through a
separate conduit. All video, control, and alarm wires must be routed through a second conduit
to the right side of the box. Refer to
Section 5 Cable and Wire Standards, page 70
for methods
of transmitting video and data, and for wire specifications.
3.4.1
Coaxial Cable Connections
If you are using coaxial cable to connect an AutoDome to a head-end system, you must use the
coax cable with ferrite included in the AutoDome packaging. The following illustration shows
the components of this cable:
Figure 3.3
Coaxial cable with ferrite
You must connect the incoming coax cable (from the head-end) to the BNC jack (item 4
above) on the ferrite cable and connect the BNC plug (item 1) of the ferrite cable to the BNC
connector on the Pipe Interface Board.
WARNING!
External interconnecting cables are to be installed in accordance to NEC, ANSI/NFPA70 (for
US application) and Canadian Electrical Code, Part I, CSA C22.1 (for CAN application) and in
accordance to local country codes for all other countries.
Branch circuit protection incorporating a 20 A, 2-pole Listed Circuit Breaker or Branch Rated
Fuses are required as part of the building installation. A readily accessible 2-pole disconnect
device with a contact separation of at least 3 mm must be incorporated.
CAUTION!
A VG5 600 Series AutoDome installation using coaxial cable to transmit video, either through a
direct coaxial connection or through a fiber optic module,
requires
that you use the coaxial
cable with ferrite shipped with the AutoDome pendant. The cable only connects to the
AutoDome video output one way.
1
BNC Plug (male connector)
2
Ferrite
3
Plastic cover
4
BNC Jack (female connector)
Summary of Contents for AutoDome 600 Series
Page 1: ...AutoDome 600 Series Analog PTZ Camera AutoDome 600 Series en Installation Manual ...
Page 2: ......
Page 90: ......
Page 91: ......
