25
Verified Alarm
26
Unverified Alarm
27
Technical Alarm
28
Bypassed Zone
29
Ready to Arm
0 = All areas 1 – 16 = Areas 1 – 16*
30
Walk Test Output Mode
31
24h Alarm
0 = Any area
1 – 16 = areas 1 – 16
32
24h Panic Alarm
33
Medical Alarm
34
RF Power Fault
0 = Any repeater
35
Follow Zone
0 = Any area
1 – 16 = areas 1 – 16
36
Schedule
Table 6.1: The value ranges of output event options
* AMAX 2100 areas 1 - 2 zones 1 - 8
AMAX 3000 / 3000 BE areas 1 - 8 zones 1 - 32
AMAX 4000 areas 1 - 16 zones 1 - 64
Output Events – Detailed description
00 - Not Used
01 – System Disarmed
The output is operated in the following cases:
–
The system is disarmed after a system reset.
–
The system operated the disarm command.
The output is reset in the following cases:
–
The system is armed.
–
The programmed output time ends.
02 - System Armed
The output is operated in the following cases:
–
The system is armed after a system reset.
–
The system operated the arm command. (After the exit time ends.)
The output is reset in the following cases:
–
The system is disarmed.
–
The programmed output time ends.
If the output time is set to 000, the output will continue until the system is disarmed.
03 - System Alarm
This output is operated when an alarm occurs.
The output is reset in the following cases:
–
The system is disarmed and alarm is reset.
AMAX panel
Settings | en
77
Bosch Sicherheitssysteme GmbH
Installation Manual
2015.05 | 06 | F.01U.309.277
