Böhnke + Partner bp308, Installation Manual

Page: 74 / 154

7.13.4 LON
Connection to a LONworks network – e.g. within the building automa-
tion system – is carried out via the ASBuP interface. It is connected
to the optional SP1 connector of bp308 as well as a RJ45 plug to the
LON network.
7.14 Installation of the Emergency Call System
Emergency call systems mostly require analogue telephone connec-
tions. If a separate analogue connection is available especially for the
emergency call system, wiring can be implemented as specified for
the emergency call system. Most of the time, however, the emer-
gency call system and the modem of the control unit have to share
one telephone line. In this case, it has to be ascertained that the
emergency call system is given priority. Some emergency call sys-
tems place a through-connected extension at the disposal of a data
remote monitoring system as long as no emergency call is at hand. If
there is no such extension available on the emergency call system, a
so-called emergency call manager has to be applied that interrupts
an existing connection to the data remote monitoring system in case
of emergency and renders the freed telephone connection available
to the emergency call system.
Generally there is no valid scheme of how to install an emergency
call system. Please read the circuit diagrams and documentation con-
cerning the emergency call system, which you can find enclosed.
75
Fig. 54
The LON-Interface ASBuP for
connecting the lift to a LON-
works network.