5.7.12.3 Software Update
A software update is necessary if the lift system is to be refurbished
with additional functions. Exchanging the EEPROM is necessary only
if the printed circuit board needs to be exchanged and the data
related to the lift has to be transferred to the new printed circuit board
.
I
NFO
!
Before each software update you should back up the existing soft-
ware version and parameters on a memory card, mobile phone or
laptop. Then you can update the system with the new software after
which you should check the system. The EEPROM parameters and
existing lift program backup can be carried out on the LPCmon mon-
itor.
There are several ways of updating software: with a file stored on a
memory card or USB stick and via the USB-B (device) connection
(laptop). To carry out an update using a memory card or USB stick,
place the memory card containing the new software version in the
memory card slot or the USB stick in the USB-A connection of the
bp308. Switch on the controller and hold down the »Call/End« and
»Info/Set« for approximately 2 seconds to start the LPCmon monitor-
ing program. After clicking OK, you can access the storage medium
(memory card or USB stick) containing the new program version via
the
Open file
menu point. Navigate to the file (e.g. 88D2207B.bin) on
the medium containing the new program and select it. You can now
update the software. Follow the instructions on the display
I
NFO
!
A software update deletes the previous software version! Please
obtain information about the full functionalities of the new version and
back it up, if necessary, before commencing with the update .
The system needs to be rebooted after a successful update by press-
ing the »Call« button. The system start and subsequent system
check should be error-free
You can view the current program version number on the display in
the service menu under system info.
The program version is labelled according to the following key:
e.g. label: 88D-2101
•
88 = For target hardware:
•
88 and 78 / bp308
•
50 and 40 / bp119
•
D = Main version label:
•
D / standard main version (no longer modified)
37
Summary of Contents for bp308
