Böhnke + Partner bp308, Installation Manual

Page: 46 / 154

6.3 Installation of the Controller System bp308
The control system bp308 is supplied on an aluminium base plate. It
has got four drill holes for fixation. The plate may be fixed through
these holes only.
6.4 Installation of the Control Cabinet
BÖHNKE + PARTNER supplies your lift control unit in a control cab-
inet. According to your requirements it is either wall-mounted or
standing on the floor. Please fix your control cabinet as per the
instructions enclosed.
6.5 Assembly of the Car Terminal Box
The terminal box on the car is to be fixed in a way that you can easily
and safely reach the inspection control switch and possibly available
sockets and properly insert the travelling cable.
6.6 Assembly of the Absolute Encoder
The absolute encoder places the absolute position and speed of
the car at the disposal of every bus participant. It can be mounted
either in the shaft head or on top of the car. A toothed belt provides a
non-slip connection to the car. The unit may also be mounted at the
speed governor. In this case, the toothed belt does not have to be
used, but a magnet switch is to be inserted for correcting the slip-
page.
Please fix your control cabinet as per the instructions enclosed.
47
Fig. 25
The control system is supplied
in a cabinet, which is either
wall-mounted or standing on the
floor.
Fig. 26
Wall-mounted cabinets are
equipped with fishplates on the
back for fixing to the wall.