| | | * Safety light curtains
| | | - off [Default]
| | | - on
| | | * Retiring cam
| | | - off [Default]
| | | - on
| | | * Door B enabling (436)
| | | - off [Default]
| | | - on
| | | * Door close sig. on, if Ins/Ero
| | | - off [Default]
| | | - on
| | |
| | +- Door C settings
| | * Landing door type
| | - Automatically operated [Default]
| | - Manually operated
| | * Car door type
| | - Automatic door (parallel) [Default]
| | - Automatic door (CANopen)
| | - none
| | - Door simulation
| | - Manually operated
| | * Door open limit
| | - off [Default]
| | - on
| | * Door close limit
| | - off [Default]
| | - on
| | * Door close button enabled on limit switch
| | - off
| | - on [Default]
| | * Door motor at open limit switch
| | - off [Default]
| | - on
| | * Door motor at close limit switch
| | - off [Default]
| | - on
| | * Safety light curtains
| | - off [Default]
| | - on
| | * Retiring cam
| | - off [Default]
| | - on
| | * Door C enabling (437)
| | - off [Default]
| | - on
| | * Door close sig. on, if Ins/Ero
| | - off [Default]
| | - on
| |
| +- Interfaces
| | |
| | +- CAN ports
| | | |
| | | +- CAN 1 port
| | | | * Interface
| | | | - off
| | | | - on [Default]
| | | | * Baud rate
| | | | - 250 kBit/s [Default]
| | | | - 125 kBit/s
| | | | * CLK Monitoring
| | | | - off [Default]
| | | | - on
| | | |
| | | +- CAN 2 port
| | | * Interface
| | | - off [Default]
| | | - on
| | | * Baud rate
| | | - 250 kBit/s [Default]
| | | - 125 kBit/s
| | | * Function
| | | - RDT-300
| | | - EIS-300
| | | - DCP (RS-485)
| | | - DCP logging
| | | - APS logging
| | | - Energy meter (UMG)
138
Summary of Contents for bp308
