Black+Decker BCD701, Manual

Page: 5 / 80

auxiliary handle if provided. If auxiliary handle
not provided, grip tool at bottom of battery.
Loss of control can cause personal injury.
Warning:
Drill may stall (if overloaded or
improperly used) causing a twist. Always
expect the stall. Grip the drill firmly with
both hands to control the twisting action
and prevent loss of control which could
cause personal injury. If a stall does occur,
release the trigger immediately and
determine the reason for the stall before
re-starting.
Save these instructions
Additional Safety Information
Warning:
ALWAYS use safety
glasses. Everyday eyeglasses are
NOT safety glasses. Also use face
or dust mask if cutting operation
is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA
Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory
protection.
Warning: Some dust created by
power sanding, sawing, grinding,
drilling, and other construction
activities contains chemicals
known to the State of California to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals
are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
• Avoid prolonged contact with dust from
power sanding, sawing, grinding, drilling,
and other construction activities. Wear
protective clothing and wash exposed
areas with soap and water. Allowing dust
to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful
chemicals.
Warning: Use of this tool can
generate and/or disperse dust,
which may cause serious and
permanent respiratory or other
injury. Always use NIOSH/OSHA approved
respiratory protection appropriate for the
dust exposure. Direct particles away from
face and body.
Warning: Always wear proper
personal hearing protection that
conforms to ANSI S12.6 (S3.19)
during use. Under some conditions
and duration of use, noise from this product
may contribute to hearing loss.
5
ENGLISH
(Original instructions)
Labels on tool
The label on your tool may include the
following symbols:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
The charger is intended for indoor
use only.
Read this entire manual carefully
before using the appliance.
Position of date barcode
The Date Code, which also includes the year
of manufacture, is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
Electrical safety
Your charger is double insulated;
therefore no earth wire is required.
Always check that the mains voltage
corresponds to the voltage on the rating
plate. Never attempt to replace the charger
unit with a regular mains plug.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.