![background image](http://html1.mh-extra.com/html/black-decker-1/bcd701/bcd701_manual_2765660011.webp)
11
ENGLISH
(Original instructions)
Trigger switch & reversing button
(Fig. I)
• The drill is turned ON and OFF by
squeezing and releasing the trigger
switch (1) . The farther the trigger is
depressed, the higher the speed of the
drill.
• A forward/reverse control button (2)
determines the direction of the tool and
also serves as a lock off button.
• To select forward rotation, release the
trigger switch and depress the
forward/reverse control button to the
left.
• To select reverse, depress the
forward/reverse control button the
opposite direction.
Note:
The center position of the control
button locks the tool in the off position.
When changing the position of the control
button, be sure the trigger is released.
Note
: Continuous use in variable speed
range is not recommended. It may damage
the switch and should be avoided.
Torque control (Fig. J)
This tool is fitted with a torque adjustment
collar (3) to select the operating mode and
to set the torque for tightening screws.
Large screws and hard workpiece materials
require a higher torque setting than small
screws and soft workpiece materials.
• For drilling in wood, metal and plastics,
set the collar to the drilling position symbol
• For screwdriving, set the collar to the
desired setting. If you do not yet know
the appropriate setting, proceed as
follows:
-- Set the collar to the lowest torque setting.
-- Tighten the first screw.
-- If the clutch ratchets before the desired
result is achieved, increase the collar
setting and continue tightening the screw.
Repeat until you reach the correct
setting. Use this setting for the remaining
screws
Keyless chuck (Fig. K)
Warning:
Make certain the battery pack is
removed to prevent tool actuation before
installing or removing accessories.
To insert a drill bit or other accessory:
1. Grasp the rear half of the chuck (4) with
one hand and use your other hand to
rotate the front half in the
counterclockwise direction, as viewed
from the chuck end. This will open the
jaws of the chuck to allow insertion of the
bit or accessory
2. Insert the bit or other accessory fully into
the chuck, and tighten securely by
holding the rear half of the chuck and
rotating the front portion in the clockwise
direction as viewed from the chuck end.
Warning:
Do not attempt to tighten drill bits
(or any other accessory) by gripping the
front part of the chuck and turning the tool
on. Damage to the chuck and personal injury
may occur when changing accessories.
Fig. I
1
2
Fig. J
3
Summary of Contents for BCD701
