Black+Decker BCD701, Manual

Page: 13 / 80

13
ENGLISH
(Original instructions)
2. The GoPak will not power your
compatible tool.
--Attempt to charge the battery. If the LED
fails to come on refer to number 1 in
Troubleshooting.
Problem Possible cause Possible solution
Unit will
not start.
Battery
will not
charge.
Unit
shuts off
abruptly.
Battery has
reached its
maximum
thermal limit.
Out of
charge. (To
maximize
the life of the
battery it is
designed to
shutoff
abruptly
when the
charge is
depleted.)
Remove
battery and
charge
Allow battery
pack to cool
down.
Cables not
properly
connected.
Allow tool to
cool down.
Internal
components
too hot.
Battery not
plugged in.
Surrounding
air
temperature
too hot or
too cold.
Battery not
installed
properly.
Battery not
charged.
Check battery
installation.
Check the
cable
connections to
the battery.
Check the
connections
between the
battery, the
device used to
charge the
battery and the
working outlet
Move battery to
a surrounding
air temperature
of above 40 °F
(4.5 °C) or
below 105 °F
(+40.5 °C).
Check battery
charging
requirements.
Maintenance
Warning: To reduce the risk of
serious personal injury, turn unit
off and remove the battery pack
before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can
cause injury.
Important:
To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment should be performed by
authorized service centers or other qualified
service organizations, always using identical
replacement parts.
Cleaning
Warning:
Never use solvents or other harsh
chemicals for cleaning the non-metallic
parts of the tool. These chemicals may
weaken the plastic materials used in these
parts. Use a cloth dampened only with
water and mild soap. Never let any liquid
get inside the tool or power supply; never
immerse any part of the tool or power
supply into a liquid.
Repairs
The BLACK+DECKER GoPak 2 in 1 battery is
not serviceable.
Warning: To assure product SAFETY and
RELIABILITY, repairs, maintenance and
adjustment (including brush inspection and
replacement) should be performed by a
BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center.
Always use identical replacement parts.
Accessories
Warning : Since accessories, other than
those offered by BLACK+DECKER have not
been tested with this product, use of such
accessories with this tool could be
hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories
should be used with this product.
Recommended accessories for use with
your tool are available at extra cost from
your local dealer or authorized service
center. If you need assistance in locating any
accessory, please contact BLACK+DECKER,
call 1-800-544-6986.