Black Box ServSwitch DTX5000, User Manual

Page: 75 / 98

CHAPTER 4: OPERATIONS
63
4.12 Session Retry Settings
The DTX user station is designed to automatically establish a connection between the
DTX user station and the remote workstation. By default, if the DTX user station cannot
immediately establish a connection with the remote workstation it will retry once per
second until a connection is successfully established. You can change the default session
retry settings using the serial menu.
To access the Session Retry Menu:
1. Press Enter to display the serial menu.
2. Press
1
to access the Receiver Main Menu and press
Enter
. If the password option is
enabled, you will be prompted for a password.
3. Type the password and press
Enter
. The Receiver Main Menu will appear.
4. Press 8 to access the Console Settings Menu and press Enter . The Console Settings
Menu will appear.
5. Press
1
to access the Session Retry Menu and press
Enter
. The Session Retry Menu
will appear.
Figure 4-32. Session Retry Menu
To change the retry settings:
1. Access the Session Retry Menu via the serial menu as described above.
2. To change the time interval between retry attempts, press
1
to choose the Session
Retry Timeout Seconds option and press Enter . You will be prompted to enter a new
timeout value in SS (seconds) format.
3. Type a value between 1 and 60 (inclusive) and press
Enter
.
To confirm your selection and exit the screen, type
0
(zero) and press
Enter
.
4.13 Configuring the OSD Hotkey Sequence
To change the hotkey sequence that activates your OSD:
1. Press Enter to display the serial menu.
2. Press
1
to access the Receiver Main Menu and press
Enter
. If the password option is
enabled, you will be prompted for a password.