Black Box ServSwitch DTX5000, User Manual

Page: 52 / 98

SERVSWITCH DTX5000/5001/5002 USER GUIDE
40
To display system information in Extender Mode:
1. Press
Print Screen .
In Extender Mode, the Information tab displays user informa-
tion for your DTX user station by default.
Figure 4-6. DTX User station Connected to Transmitter
2. Click the Rcvr radio button to view system information for your DTX user station.
-or-
Click the Trans radio button to view the system information for your transmitter.
NOTE:
If there is no transmitter connected, the Trans radio button option will display as No Target.
To close the OSD:
Press
ESC
or use the mouse to click the X button on the top right-hand corner of the OSD.
4.4 The Serial Menu
The DTX user station incorporates a serial menu that allows you to:
• Configure network settings for the DTX user station
• Configure network settings for the transmitter
• Set or change passwords
• Upgrade your firmware for the DTX user station and transmitter
• Reset to factory defaults
• Set a session time-out value
• Change the audio performance settings
• Configure the transmitter for normal aspect or wide screen resolutions