Black Box ServSwitch DTX5000, User Manual

Page: 56 / 98

SERVSWITCH DTX5000/5001/5002 USER GUIDE
44
5. Press
1
to select the Transmitter Network Config option and press
Enter.
The Trans-
mitter Network Configuration Menu will appear.
Figure 4-11. Transmitter Network Configuration Menu
NOTE:
For option 5, the administrator can configure the transmitter IP address as DHCP or Static. Static is the
default configuration.
6. Press 1 to select the Transmitter IP Address option and press Enter .
7. Type a valid IP address. Press
Enter
to return to the Transmitter Network Configura-
tion Menu.
8. Press
2
to select the Transmitter Netmask option and press
Enter
.
9. Type a valid Transmitter Netmask. Press Enter to return to the Transmitter Network
Configuration Menu.
10. Press
3
to select the Transmitter Default Gateway option and press
Enter
.
11. Type a valid Transmitter Default Gateway. Press
Enter
to return to the Transmitter
Network Configuration Menu.
12. Type 0 (zero) and press Enter to return to the Network Configuration Menu. If you
made a mistake and do not wish to save the changes you made to the network set-
tings, type
C
and press
Enter
.
13. A system message will appear that states Connection to the Transmitter is lost . You
will be automatically returned to the Appliance Selection Menu screen.
14. Press option 1 to access the Receiver Menu (user station menu) and press Enter . If
the password option is enabled, you will be prompted for a password.
15. Type the password and press
Enter
. The Receiver Main Menu will appear.