Black Box ServSwitch DTX5000, User Manual

Page: 62 / 98

SERVSWITCH DTX5000/5001/5002 USER GUIDE
50
8. Press
2
to select the Management Appliance IP Configuration Menu in the Network
Configuration Menu (Matrix Mode) and press
Enter
. The Management Appliance IP
Configuration Menu will appear.
Figure 4-19. DTX5000-CTL Management Appliance IP Configuration Menu
Detecting a transmitter IP address
In the event that you forget the IP address of a transmitter, you can use the serial menu to
detect the IP address of a transmitter that is connected to the DTX user station.
NOTE:
This can only be done if the transmitter has been assigned a static IP address.
To detect the IP address of a connected transmitter:
1. Turn off the transmitter and directly connect it to the user station.
NOTE:
If the transmitter receives its power from an external power supply, disconnect the transmitter from that
external power supply.
2. Press
1
to access the Receiver Main Menu and press
Enter
. If the password option is
enabled, you will be prompted for a password.