Black Box ServSwitch DTX5000, User Manual

Page: 77 / 98

CHAPTER 4: OPERATIONS
65
7. To confirm your selection and exit the screen, type
0
(zero) and press
Enter
.
4.14 OSD Inactivity Timeout
By default, the DTX user station is configured to dismiss the OSD after an inactivity
period of 10 minutes. To reactivate the OSD, you must enter a valid OSD hotkey
sequence.
Using the serial menu, you can modify the default configuration. You can disable the OSD
timeout or you can change the time-out period to any value between zero minutes and 10
hours. Setting the time-out period to zero means that the OSD will not timeout. The
maximum time-out period that can be configured is 9 hours and 59 minutes.
NOTE:
You can dismiss the OSD at any time by pressing ESC.
To change the OSD timeout period:
1. Press
Enter
to display the serial menu.
2. Press 1 to access the Receiver Main Menu and press Enter . If the password option is
enabled, you will be prompted for a password.
3. Type the password and press
Enter
. The Receiver Main Menu will appear.
Table 4.2 OSD Hotkey Sequences
Hotkey Sequences
All Print Screen (Default)
Ctrl + Ctrl (L - R) Ctrl + Ctrl (L)
Ctrl + Ctrl (R) Alt + Alt (L - R)
Alt + Alt (L) Alt + Alt (R)
Shift + Shift (L - R) Shift + Shift (L)
Shift + Shift (R) Scroll Lock + Scroll Lock