Black Box ServSwitch DTX5000, User Manual

Page: 35 / 98

CHAPTER 3: INSTALLATION
23
4. Connect the DTX5000-T transmitter’s audio and microphone connectors to the
appropriately labeled ports on the back of the workstation.
NOTE:
For CD-quality audio, you must configure the DTX5000-T transmitter and the user station using the serial
menu.
5. Connect one end of the UTP cable to the DTX5000-T transmitter’s RJ-45 connector
and turn on the workstation.
6. Route the other end of the UTP cable to the location you have chosen for the
DTX5000-R user station. If necessary, you can extend the UTP cable via junctions or
a hub (subject to normal Ethernet cabling practices).
Figure 3-2. DTX5000-T Transmitter
Table 3.2 Descriptions of Figure 3.2
Number Type of Connector
1 vMedia and vUSB
2 Low speed for K/M
3 Mic
4 Line-out
1 2 3 4
5