Black Box ServSwitch DTX5000, User Manual

Page: 73 / 98

CHAPTER 4: OPERATIONS
61
Figure 4-29. Receiver Appliance Information Menu
To view transmitter system information:
1. Press
Enter
to display the serial menu.
2. Press
2
to access the Transmitter Main Menu and press
Enter
. If the password option
is enabled, you will be prompted for a password.
3. Type the password and press Enter . The Transmitter Main Menu will appear.
4. Press 6 to access the Appliance Information Menu and press Enter . The Appliance
Information Menu will appear.
5. Press
1
to access the Transmitter Appliance Information Menu and press
Enter
. The
Transmitter Appliance Information Menu will appear.
The Transmitter Appliance Information Menu screen contains the following information
and all values are read-only:
• transmitter name
• EID number
• release version
• application
• boot and FPGA firmware version numbers
• manufacturing part number
4.11 Configuring Video Input Settings
The DTX5000-T and DTX 5001-T transmitters are capable of transmitting either digital
(DVI) or analog video (VGA) from the remote workstation to your monitor. The
DTX5002-T transmitter is capable of transmitting DVI only from the remote workstation
to your analog digital monitor. The DTX Extender System will normally operate well
when set on its default settings. The DTX5000-R user station needs the transmitter to be
set for the dedicated video type to operate correctly.
NOTE:
Video-display problems may occur if video input settings are not configured correctly,