Black Box ServSwitch DTX5000, User Manual

Page: 41 / 98

CHAPTER 3: INSTALLATION
29
Figure 3-5. Point-to-Point Installation (DTX5002-R and DTX5002-T)
To connect the DTX5001-T or DTX5002-T transmitter:
Before connecting the DTX5001-T or DTX5002-T transmitter to the remote workstation,
ensure that the resolution and the refresh rate of the remote workstation are supported by
the DTX5002-R user station. Set the screen resolution and refresh rate of the remote
workstation. Unsupported settings will cause blank video at the receiver.
NOTE:
Visit www.blackbox.com for updated information on supported resolutions and refresh rates.
1. Turn off the remote workstation.
2.
Connect the USB connector on the transmitter to the corresponding USB
port on the workstation
.
3. Connect the video connector and audio connector on the DTX5001-T or DTX5002-T
transmitter to the appropriately labeled ports on the back of the workstation.
Table 3.5 Descriptions of Figure 3-5
Number Description
1 Remote Workstation
2
DTX5002-T
transmitter
3
DTX5002-R User
station
2
1
3