Black Box ServSwitch DTX5000, User Manual

Page: 51 / 98

CHAPTER 4: OPERATIONS
39
Figure 4-5. Target Screen (Matrix Mode)
5. Select the remote PC to which you wish to connect and click Connect.
NOTE:
Once a remote PC has been selected, Matrix Mode denies access to any other user.
Access through Auto-Login Mode
Using the DTX5000-CTL Management Appliance, an administrator can enable Auto-
Login Mode. Once this step is complete, the DTX user station is reset by the DTX5000-
CTL Management Appliance and it attempts to connect to the specified transmitter. A
login progress message will be seen at this point.
NOTE:
The OSD will clear after a defined period of inactivity. To reactivate the OSD, enter a valid hotkey
sequence.