Black Box ServSwitch DTX5000, User Manual

Page: 66 / 98

SERVSWITCH DTX5000/5001/5002 USER GUIDE
54
1. Press
Enter
to display the serial menu.
2. Press
1
to access the user station menu (if you lose your transmitter password, press
2
and continue with the following steps). Press Enter.
3. You will be prompted to enter your current password.
4. Type ?????? (six question marks) and press Enter . The serial menu will generate a
code and display it to you. The code is a 16 character hex sequence. The serial menu
will also prompt you to enter a Key.
5. Contact BLACK BOX Technical Support to obtain the Key.
6. In the serial menu at the Key prompt, type the new 16 character hex sequence pro-
vided by BLACK BOX Technical Support. Press
Enter
.
7. The default password is now active.
Authentication for the transmitter
You can change the password settings for the transmitter through the serial menu using the
Transmitter Security Configuration Menu
.
To access the Transmitter Security Configuration Menu:
1. Press
Enter
to display the serial menu.
2. Press 2 to access the Transmitter Main Menu and press Enter . If the password option
is enabled, you will be prompted for a password.
3. Type the password and press
Enter
. The Transmitter Main Menu will appear.
4. Press
2
to access the Security Configuration menu and press
Enter
. The Security
Configuration Menu will appear.
Figure 4-24. Transmitter Security Configuration Menu
To disable or enable the transmitter password:
1. Press 1 to access the Console password menu on the Security Configuration Menu
and press
Enter
. If a password has been enabled, this action will disable the pass-
word.
2. If a password has been disabled, you will be prompted to enter a password.
3. Type the new password and press Enter .