62
SERVLINK™
6.1.2.B The Settings Dialog Box
When you click “Settings” at the Control Module Processing box, the dialog box
shown in Figure 6-8 appears.
Figure 6-8. The Control Module Processing: Settings dialog box.
Here’s what the components of the “Control Module Processing: Settings” box are
for:
•
Reboot
Click this button to reboot the PC or other device attached to this Power
Management Module. If “Require Reasons for Power OFF actions” is checked
in the Control Module Configuration window (see
Section 6.1.3
), you will be
required to give a reason for doing this.
•
Power ON
Click this button to turn ON power to the PC or other device attached to this
Power Management Module. (If the power is already ON, this option will be
grayed out.) If “Require Reasons for Power ON actions” is checked in the
Control Module Configuration window (see
Section 6.1.3
), you will be
required to give a reason for doing this.
Summary of Contents for ServLink ACR3500A
