64
SERVLINK™
6.1.3 C
ONTROL
M
ODULE
C
ONFIGURATION
(S
ERV
LINK S
YSTEM WITH
P
OWER
M
ANAGEMENT
M
ODULES
O
NLY
)
NOTE
For more details about the Power Management Modules, refer to their
own manual.
When you select “Control Module Configuration” from the Switch menu, or when
you click “Configuration” at the Control Module Processing box, the dialog box
shown in Figure 6-9 appears.
Figure 6-9. The Control Module Configuration dialog box.
This box is for configuring some of the ServLINK’s systemwide Power Management
Module settings. (If you don’t have Power Management Modules installed, it’s
irrelevant.) Here’s what the components of this box are for:
•
Require Reasons for Power OFF Actions
When this box is checked, users are required to provide a reason whenever
they reboot or power down any device connected to a Power Management
Module from the “Control Module Processing: Settings” window (see
Section 6.1.2.B
). The justification may contain up to two lines of 50 characters
per line, and is saved in the ServLINK’s event log.
Summary of Contents for ServLink ACR3500A
