Black Box Compact T1 MT850A, User Manual

Page: 270 / 592

5-186 Compact T1 - Release 6.1
CLI Commands
set
set (router-wan) ipx
Use the set (router-wan) ipx command to set the IPX traffic handling on the WAN interface.
Syntax:
set {rtr_card-addr} {"wan-name"} ipx {setting}
Example:
set 1 "LosAngeles" ipx bridge
The example will set the WAN interface named "LosAngeles" in slot 1, to
bridge IPX.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"wan-name"}
The WAN interface to modify. The name must be enclosed in quotes.
{setting}
block Set the WAN to block IPX.
bridge Set the WAN to bridge IPX with optimized local advertising IPX servers
and networks.
optimize Set the WAN to bridge IPX with optimized local advertising of IPX
servers and networks.
Setting to optimize enables the Adit to use a custom network optimization
feature, which ensures that only necessary data is transmitted over the
WAN connection. The Adit will initiate IPX learning mode. Learning
mode is effective for optimizing bandwidth usage for IPX RIP, SAP,
serialization and watchdog (IPX and SPX) packets. If you choose this
option, the Adit will initiate learning mode in order to gain knowledge of
local and remote networks and services. Once it knows of remote networks
and services, it can advertise the information on the local LAN on behalf
of the remote networks and servers.