Black Box Compact T1 MT850A, User Manual

Page: 246 / 592

5-162 Compact T1 - Release 6.1
CLI Commands
set
set (router-lan) rip ipx
Use the set (router-lan) rip ipx command to specify the IPX RIP and SAP for the specified
LAN interface.
Syntax:
set {rtr_lan-addr} rip ipx {both|neither|recv|send}
Example:
set 2:1 rip ipx send
The example will set RIP and SAP on the local LAN interface on slot 2 to send.
{rtr_lan-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
{both|neither|recv|send}
slot The slot number (1-6) that contains the Router card.
port Port number of the Router is 1.
"profile-name" The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
both Enable IP RIP (or IPX RIP and SAP) in both directions.
neither Shut IP RIP (or IPX RIP and SAP) off completely.
recv Enable IP RIP (or IPX RIP and SAP) in the receive direction only.
send Enable IP RIP (or IPX RIP and SAP) in the send direction.