Biotechne ProteinSimple Peggy Sue User Manual Download Page 78

Page: 78 / 88

page 74

Chapter 6:

General Information

Sally Sue and Peggy Sue User Guide

Compliance

Sally Sue and Peggy Sue comply with:

•

UL 61010-1:2001

: Safety requirements for electrical equipment for measurement, control, and labo-

ratory use - Part 1: General requirements (US)

•

EN 61010-1:2001

: Safety requirements for electrical equipment for measurement, control, and labo-

ratory use - Part 1: General requirements (EU)

•

CAN/CSA 22.2 No. 61010-1-04

: Safety requirements for electrical equipment for measurement, con-

trol, and laboratory use - Part 1: General requirements (CA)

•

EN 61326-1:2006

: Electrical equipment for measurement, control and laboratory use. EMC Require-

ments. General requirements (EU)

Safety Guidelines

!WARNING!

If Sally Sue and Peggy Sue are not used as specified by ProteinSimple, overall safety will be impaired.

!WARNING!

If Sally Sue or Peggy Sue are damaged and don’t function properly, stop them safely and contact Pro-

teinSimple Technical Support immediately.

!WARNING!

You cannot replace or service any parts except for the ionizer fan and separation block.

CAUTION

Avoid using Sally Sue or Peggy Sue in ways not specified by ProteinSimple. Although the instru-

ments have been designed to protect you, this protection may not be effective if they aren’t used

properly.

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands