Biotechne ProteinSimple Peggy Sue User Manual Download Page 57

Page: 57 / 88

Controlling Sally Sue and Peggy Sue

page 53

Sally Sue and Peggy Sue User Guide

Opening Trays

To open any of the five trays, select

Instrument

and click

Open Trays

. The tray control window will display:

Open a tray by clicking its button. The button will change color when a tray is open.

NOTE: Only one tray can be open at a time.

To close a tray, click its tray button again.

NOTE: If the tray control window is closed when a tray is open, the tray will close automatically.

Cleaning

Instrument cleaning can be performed either manually or automatically in Compass for Simple Western.

Resource Tray

Sample Tray

Resource Tray

Open

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands