Biotechne ProteinSimple Peggy Sue User Manual Download Page 27

Page: 27 / 88

Instrument Overview

page 23

Sally Sue and Peggy Sue User Guide

Capillary Discard Tray

The capillary discard tray collects used capillaries as each cycle completes. We recommend placing an
inverted plate lid in the tray area to catch capillaries, and emptying the lid on a daily basis.

!WARNING! SHARPS HAZARD

Capillaries may present a potential sharps hazard. Dispose of used capillaries according to your insti-

tution's sharps disposal policy.

NOTE: An overfilled capillary discard tray can cause the sample tray to jam. If this happens, call Protein-

Simple Technical Support at (888) 607-9692 or (408) 510-5500, option 3.

Plate Lid

Discarded
Capillaries

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands