Biotechne ProteinSimple Peggy Sue User Manual Download Page 63

Page: 63 / 88

Instrument Status Modes

page 59

Sally Sue and Peggy Sue User Guide

Instrument Status Modes

The status bar shows status, buttons and progress bars depending on what Sally Sue or Peggy Sue are doing.

•

Ready/Start button

- We’re ready and an assay is loaded. Click

Start

to begin a run.

•

Not Ready/Clean button

- We’re not ready and need to do a system cleaning. Click

Clean

to start

the cleaning protocol.

•

Not Ready/Reset button

- We’re not ready and need to reinitialize. Click

Reset

to start the initializa-

tion protocol.

•

Running/Stop button

- We’re running an assay. The run name, time the run started and when it will

done show in the progress bar. Click

Stop

to stop the run.

•

Cleaning/button not active

- We’re running a cleaning protocol. The time the cleaning protocol

started and when it will be done show in the progress bar.

•

Error/Reset button

- We’ve detected an error. You can go to the Status window in the Run Summary

screen to get more details. Once you’ve been able to correct the error, click

Reset

Shutdown

Close Compass for Simple Western and shut down the system computer.

Sally Sue and Peggy Sue can remain on unless you don’t think they’ll be used for more than a week. In
that case, you can just turn the power off.

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands