Biotechne ProteinSimple Peggy Sue User Manual Download Page 53

Page: 53 / 88

Starting a Run: Charge-based Assays (Peggy Sue Only)

page 49

Sally Sue and Peggy Sue User Guide

NOTES:

Peggy Sue requires plate lids on sample plates. If a lid isn’t detected, a message will display in the

Start

Run Wizard

. Compass for Simple Western will then open the sample tray to allow you to put a lid on the

plate.

When you insert the sample plate, make sure it’s firmly seated and level on the cold block. When plates

aren’t level they can interfere with the movement of the sample tray.

Begin the Automated Run.

The data file name will automatically default to the assay name appended

with the current date and time. To change the file name, begin typing in the text box. To change the
directory where the data file will be stored, click

Browse

Click

Start

to begin the run. Instrument status will change to running, and the stop button and progress

bar will display:

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands