Biotechne ProteinSimple Peggy Sue User Manual Download Page 30

Page: 30 / 88

page 26

Chapter 3:

Sally Sue and Peggy Sue

Sally Sue and Peggy Sue User Guide

Instrument - Left Panel

Located on the lower left side of Sally Sue and Peggy Sue are their serial number, power entry, power switch
and connector panel.

•

System Serial Number

: This label contains the serial number for the system.

•

System Power

- The main system power components include the power switch and power input.

!WARNING!

Only use the power supply cord provided with Sally Sue or Peggy Sue. If the cord is damaged,

please contact ProteinSimple Technical Support.

!WARNING!

No user replaceable parts.

!WARNING! SHOCK HAZARD

Disconnect the power cord from the instrument power input to disconnect power to the instru-

ment.

•

Network Connection

- A 10/100/BASE-T Ethernet (RJ-45 connector) is used to connect Sally Sue and

Peggy Sue to a computer or local network.

NOTE: Serial numbers are used to identify individual instruments on the network.

Vacuum

Compressed

Air

Network

Connection

Circuit

Breaker

Serial

Number

Power

Input

Power

Switch

Auxiliary Module

Control

Waste

Water

Summary of Contents for ProteinSimple Peggy Sue

























































































Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands

Biotechne ProteinSimple Peggy Sue, User Manual

Search results

Summary of Contents for ProteinSimple Peggy Sue

Reviews:

Related manuals for ProteinSimple Peggy Sue

Brands by name

Popular brands