Biotechne ProteinSimple Peggy Sue User Manual Download Page 6 | Manualshive

Page: 6 / 88

background image

page 2

Chapter 1:

Let’s Get Started

Sally Sue and Peggy Sue User Guide

Welcome

Congratulations on bringing Sally Sue™ or Peggy Sue™ into your lab! We welcome you as a new user and are
excited to be a part of your work. This user guide will provide you with information on how Simple Western
assays work as well as other useful operating and installation information.

To help you get the most from Sally Sue and Peggy Sue, we've added some attention phrases to guide you
through the user guide:

NOTE

Points out useful information.

IMPORTANT

Indicates information necessary for proper operation of Sally Sue and Peggy Sue.

CAUTION

Cautions you about potentially hazardous situations that could result in injury to you or

damage to Sally Sue and Peggy Sue.

!WARNING!

Warns you that serious physical injury can result if the listed precautions aren’t followed.

Simple Western Assays

A Simple Western assay is an automated Western - no gels, no transfer devices, no blots, no film and no man-
ual analysis.

Simple Westerns take place in a capillary. Sally Sue and Peggy Sue automate all steps of the process for you
including sample loading, protein separation, immunoprobing or labeling, washing, detection and data
analysis. Up to 12 samples can be analyzed simultaneously in a single cycle and up to 8 cycles (96 samples)
can be processed in a single run.

Sally Sue performs Simple Western size-based assays (Immunoassay and Total Protein assay) and Peggy Sue
can do both size-based and charge-based assays. All you have to do is pipette your samples, separation
reagents and immunoreagents into the plate, load the capillaries and press start.

«
...
4
5
6
7
8
...
»

Summary of Contents for ProteinSimple Peggy Sue

























































































Reviews:

No comments

Related manuals for ProteinSimple Peggy Sue

Brand: ZOLL Pages: 84

Brand: Kaivac Pages: 29

Brand: MacDon Pages: 65

Brand: BACtrack Pages: 13

Brand: TA Instruments Pages: 35

Brand: Warehouse-lighting Pages: 3

Brand: E2S Pages: 5

Brand: dbx Pages: 2

Brand: Haag-Streit Pages: 18

Brand: Haag-Streit Pages: 20

Brand: V-TEK Pages: 2

Brand: V-TEK Pages: 112

Brand: Maico Pages: 55

Brand: Maico Pages: 38

Brand: Maico Pages: 2

Brand: MAHA Maschinenbau Haldenwang Pages: 13

Brand: UEi Pages: 5

Brand: UGO BASILE Pages: 47

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands