BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 6 of 58
WARNING – EQUIPMENT DAMAGE
Operate only when located on a flat surface, and engage the brakes on
the ProteQ unit. Always remove Aeration units from the ProteQ base
unit, if present, before running a cycle.
Place the aeration units onto the floor in the correct position, do not drop
or throw to the ground. Carry units, do not move by kicking or dragging
along the floor
Do not use the aeration units as a step this will damage the equipment
BEFORE MOVING EQUIPMENT after cycle is complete always disconnect
power cables. Put away all equipment in the ProteQ base unit.
Repairs, maintenance or adjustments to the Bioquell ProteQ generator
must only be made by trained Bioquell personnel or their agents.
The equipment must be serviced in accordance with the Maintenance
Schedule to maintain safe performance.
DANGER – PERSONAL INJURY HAZARD
The ProteQ can weigh up to 86Kg (190 lbs), the lectern alone 9Kg (20 lbs)
and the aeration units weigh 10Kg (22 lbs). Appropriate lifting procedures
should be followed. Do not lift multiple aeration units.
When moving the ProteQ use the handles on either side of the bottle
module. Two aeration units can be transported in the ProteQ, any further
units should be transported using a suitable trolley and securing method.
The user should not open access panels. This should only be for Bioquell
trained service engineers.
When moving the ProteQ with bottles containing liquid ensure the bottle
engagement plunger is locked in its down position.
