BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 25 of 58
•
Process variables
•
If sensor unit: Total hydrogen peroxide used and peak gas concentration
as measured by the H
2
O
2
sensor during gassing, dwell and aeration
process phases
All alarms and warnings are printed with the time the alarm occurred.
All print outs are also stored on the unit’s hard disk, and can be retrieved using
FTP, refer to TD092-SP-001 for full details.
The paper feed button can be pressed
as indicated on the left.
To remove the printed report pull the
paper up to rip off.
To change the paper in the printer,
refer to section 14.1.1.
If the paper runs out the printer will
print at least the last 2 cycles which
have not been printed.
8.5
Log OFF
Press the icon in the top right of the
screen to log off. It is important that
the user logs off as soon as they
have started the cycle or stops the
cycle as their name will be the one
printed
8.6
Process Stop
If the process stop button is
pressed the ProteQ will stop
working and an alarm will activate.
To release the button twist
carefully clockwise, the button will
then spring back up.
