BIOQUELL PROTEQ USER MANUAL -EN
TD092-O&M-001
REVISION 5 DRAFT
Page 24 of 58
8.3
Aeration Only Cycle
If there is an alarm the ProteQ will automatically go into emergency aeration if
the cycle has progressed beyond conditioning, this will keep aerating until
stopped by the user.
Aeration Only cycle can also be selected as described in Section 9 from the drop
down list of stored cycles if required.
8.4
Printed Report
A printed report is created for every cycle and contains the following data:
1.
Header
2.
Date & Time
3.
PLC software version
4.
HMI software version
5.
ProteQ serial number
6.
Cycle count
7.
Calibration due date
8.
H
2
O
2
lot number
9.
The active programme name and parameters
10.
User name
11.
Signature (manual input required)
At each transition between cycle phases the following data is printed:
•
Time
•
Cycle phase
The gold line can be dragged from the top
along horizontally and the data at that
point on the graphs will be displayed in
the window.
Press the
button to move to a history/
archive view of the cycle.
The history/archive view is similar to the
real-time view except it is possible to go
back further in time. The gold line and
data window is also available.
By pressing the
icon, an input screen
appears allowing the start and end time
over which the data to be viewed is
required.
Press the
button to return to the real
time graph.
